World's longest and highest glass-bottom bridge to open in China

Bridge construction:- No steel or concrete was used to create the surface of the bridge, which is 430 metres (1410 feet) long 6 metres (20 feet) wide.



Chalk up another superlative achievement for China.
Zhangjiajie, a scenic national park in the country's Hunan province, is set to open the world's longest and highest glass-bottomed bridge in July.


Spanning two cliffs in the Zhangjiajie Grand Canyon area, it will stretch 430 meters (1,410 feet) long and 6 meters (20 feet) wide, hovering over a 300-meter (984-foot) vertical drop.

In comparison, the Grand Canyon Skywalk in the United States is 21 meters (69 feet) in length and stands 219 meters (718 feet) above the canyon floor. Canada's Glacier Skywalk in Alberta, which opened last year, extends 35 meters (115 feet) from the cliff and is a little bit shy of 300 meters in height.

The footbridge was designed by Israeli architect Haim Dotan, who is also behind Expo 2010 Shanghai's Israel Pavilion. Dotan says the bridge will serve as a runway for fashion shows and be able to hold up to 800 people at once.
The Grand Canyon of Zhangjiajie skywalk will also offer the world's highest bungee jump, stealing the title from Macau Tower's 233-meter (764-foot)-high attraction.
Zhangjiajie is a 56 square-kilometer designated tourist park inside the bigger Wulingyuan Scenic Area. It's been open to the public since 2009 and is said to have been the inspiration behind the beautiful planet of Pandora in James Cameron's 2009 "Avatar" film.

Comments

Post a Comment

Popular posts from this blog

Lane’s Weighted Creep Theory

Image
Bligh, in his theory, had calculated the length of the creep, by simply adding the horizontal creep length and the vertical creep length, thereby making no distinction between the two creeps. However, Lane, on the basis of his analysis carried out on about 200 dams all over the world, stipulated that the horizontal creep is less effective in reducing uplift (or in causing loss of head) than the vertical creep. He, therefore, suggested a weightage factor of 1/3 for the horizontal creep, as against 1.0 for the vertical creep. Thus in Fig–1,  the total Lane’s creep length (L l ) is given by L l = (d 1 + d 1 ) + (1/3) L 1 + (d 2 + d 2 ) + (1/3) L 2 + (d 3 + d 3 ) = (1/3) (L 1 + L 2 ) + 2(d 1 + d 2 + d 3 ) = (1/3) b + 2(d 1 + d 2 + d 3 ) To ensure safety against piping, according to this theory, the creep length Ll must no be less than C1H L , where H L is the head causing flow, and C 1 is Lane’s creep coefficient given in table –2 Table – ...
Read more

What is Soil in Geotechnical Engineering.

Image
Definition of Soil The word ‘soil’ is derived from the Latin word solium which, according to Webster’s dictionary, means the upper layer of the earth that may be dug or plowed; specifically, the loose surface material of earth in which the plants grow. The above definition of soil is used in the field of agronomy (The application of soil and plant sciences to land management and crop production) where the main concern is in the use of soil for raising crops. In geology, earth’s crust is assumed to consist of unconsolidated sediments, called mantle or regolith, overlying rocks. The top soil contains a large quantity of organic matter and is not suitable as a construction material or as a foundation for structure. The top soil is removed from the earth’s surface before the construction of structure. The term ‘ soil ’ in the soil engineering is defined as an unconsolidated material , composed of solid particles , produced by the disintegration of rocks . The void space...
Read more

What is Mill bent in Industrial Buildings?

Image
The assembly of roof truss attached to and supported on column at both the ends is known as bent, mill bent or transverse bent . An industrial buildings consists of a series of such transverse bent supporting the roof. The distance between the two adjacent transverse bents is known as bay . The space between the column lines is usually called an aisle.
Read more